Steel IBC Stand - Steel


Steel IBC Stand - Painted (Grey)


Steel IBC Stand

Make life easier with a steel IBC stand. Our convenient IBC stand is perfect for construction sites, farms, factories and chemical plants. Raising your IBC on one of these stands, will not only improve the flow thanks to the increased gravitational pull, but it will also help to improve safety on your site.

Suitable for any 1000 Litre IBC, the platform is fitted with steel corner guides to stop your IBC from sliding or being knocked out of position. Letting you access your IBC without worrying about an IBC crushing yourself or a colleague. Something that stacking two IBCs on top of each other, or an IBC on a stack of pallets does not offer.

Thanks to the raised position of your outlet at 900mm high, you can gravity feed whatever you are decanting into, letting you empty your IBCs faster and without the need for pumps or pipework.

Another great benefit of an IBC stand is that you can fit a much broader range of containers below; such as large buckets, troughs, mixing baths, mortar tubs, jerry cans and more - whilst still accessing your outlet at its new raised height at 900mm. Should you require a higher stand, please contact our helpful team to discuss options.

Constructed from hard-wearing steel, this stand is built to withstand industrial or heavy-duty environments. The stand can also be painted in a grey anti-corrosion paint, if you plan on storing your stand outdoors, this is will make sure that your investment goes the distance.

If you need to lift your stand with a forklift or telehandler, we can add fork channels to your stand - otherwise they can be placed on a pallet truck to be moved.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Steel IBC Tipper - 5 Degrees


Steel IBC Tipper - 8 Degrees


Steel IBC Tipper - 10 Degrees


Steel IBC Tipper

Our Steel IBC Tipper maximises the dispensing capability of your IBC while avoiding waste and environmental and safety hazards.

The Steel IBC Tipper works by tilting the IBC as its contents empty. This increases the pressure at the tap and allows the liquid to flow quicker. It also makes it possible to empty your IBC fully which can save money in the long run.

Roughly 5 litres of fluid remain at the bottom of an IBCs bottle when emptied conventionally. Depending on the value of the liquid, this could pay for the tipper within a matter of weeks, days, or even its first use.

When it comes to choosing how many degrees you may need for your tipper, the higher the angle, the greater the pressure. However, we usually recommend 5 degrees as standard and 8-10 degrees for more viscous liquids. If you are unsure, please contact our sales team who will be happy to assist.

Please Note: At 8 degrees or above it can be difficult to load and unload the tipper from the side.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Powder Coated IBC Tipper - 5 Degrees


Powder Coated IBC Tipper - 8 Degrees


Powder Coated IBC Tipper - 10 Degrees


Powder Coated IBC Tipper

Our Powder Coated IBC Tipper maximises the dispensing capability of your IBC while avoiding waste and environmental and safety hazards.

The Powder Coated IBC Tipper works by tilting the IBC as its contents empty. This increases the pressure at the tap and allows the liquid to flow quicker. It also makes it possible to empty your IBC fully which can save money in the long run.

Roughly 5 litres of fluid remain at the bottom of an IBCs bottle when emptied conventionally. Depending on the value of the liquid, this could pay for the tipper within a matter of weeks, days, or even its first use.

When it comes to choosing how many degrees you may need for your tipper, the higher the angle, the greater the pressure. However, we usually recommend 5 degrees as standard and 8-10 degrees for more viscous liquids. If you are unsure, please contact our sales team who will be happy to assist.

Please Note: At 8 degrees or above it can be difficult to load and unload the tipper from the side.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Painted IBC Tipper - 5 Degrees


Painted IBC Tipper - 8 Degrees


Painted IBC Tipper - 10 Degrees


Painted IBC Tipper

Our Painted IBC Tipper maximises the dispensing capability of your IBC while avoiding waste and environmental and safety hazards.

The Painted IBC Tipper works by tilting the IBC as its contents empty. This increases the pressure at the tap and allows the liquid to flow quicker. It also makes it possible to empty your IBC fully which can save money in the long run.

Roughly 5 litres of fluid remain at the bottom of an IBCs bottle when emptied conventionally. Depending on the value of the liquid, this could pay for the tipper within a matter of weeks, days, or even its first use.

When it comes to choosing how many degrees you may need for your tipper, the higher the angle, the greater the pressure. However, we usually recommend 5 degrees as standard and 8-10 degrees for more viscous liquids. If you are unsure, please contact our sales team who will be happy to assist.

Please Note: At 8 degrees or above it can be difficult to load and unload the tipper from the side.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Galvanised IBC Tipper - 5 Degrees


Galvanised IBC Tipper - 8 Degrees


Galvanised IBC Tipper - 10 Degrees


Galvanised IBC Tipper

Our Galvanised IBC Tipper maximises the dispensing capability of your IBC while avoiding waste and environmental and safety hazards.

The Galvanised IBC Tipper works by tilting the IBC as its contents empty. This increases the pressure at the tap and allows the liquid to flow quicker. It also makes it possible to empty your IBC fully which can save money in the long run.

Roughly 5 litres of fluid remain at the bottom of an IBCs bottle when emptied conventionally. Depending on the value of the liquid, this could pay for the tipper within a matter of weeks, days, or even its first use.

When it comes to choosing how many degrees you may need for your tipper, the higher the angle, the greater the pressure. However, we usually recommend 5 degrees as standard and 8-10 degrees for more viscous liquids. If you are unsure, please contact our sales team who will be happy to assist.

Please Note: At 8 degrees or above it can be difficult to load and unload the tipper from the side.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Universal Lifting Cage

Elevate your material handling efficiency with the Universal Lifting Cage, a versatile forklift and crane-compatible attachment designed for the safe and secure transport of diverse goods. Engineered to accommodate standard Euro pallets (1200x800mm) or a 1100-litre wheelie bin, this robust cage supports loads up to 2500kg. With flexible access via a drop-down ramp or swing doors, it ensures effortless loading and unloading, ideal for warehouses, construction sites, and industrial facilities.

Constructed with a heavy-duty steel framework, it features external tag line loops, internal tie-down points, and a secure folding handle with chain and pin locking for maximum load safety. Equipped with fork channels and lifting eyes, it offers dual mobilisation for forklifts and cranes. CE-marked and UKCA compliant, it includes a 3-year warranty and full certification per the Machinery Directive (2006/42/EC). Since 1974, we’ve been the UK’s leading innovator in forklift attachments, delivering reliable, UK-manufactured solutions.

Why Buy the Universal Lifting Cage?

 	High Capacity: Supports up to 2500kg for Euro pallets or 1100-litre wheelie bins, ensuring versatile load handling.
 	Flexible Access: Drop-down ramp or swing doors for easy, safe loading and unloading.
 	Dual Mobilisation: Fork channels and lifting eyes enable use with both forklifts and cranes.
 	Full Compliance: CE-marked and UKCA compliant with rigorous testing and a 3-year warranty.

Would a tipping skip work? View our range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


1000 Litre Black IBC

This 1000L New Black IBC with Plastic Pallet has a new inner bottle, new galvanised steel frame and a new lid and valve. The pallet is produced from environmentally friendly post-consumer recycled (PCR) plastic, reducing waste sent to landfill. The inner bottle of this container is manufactured from blow moulded high-density polyethylene (HDPE) with bevelled edges. It has a classification of non-hazardous liquid storage.

Food safe and BPA free, this IBC is suitable for storing liquids for human consumption including drinking water, milk, alcohol and oils. As well as this, it meets the strict criteria for Halal and Kosher food production. Certificates can be found in the "Product Downloads" section.

The inner bottle of this container is manufactured from blow moulded, UV-stabilised virgin polyethene (HPDE) with bevelled edges. This IBC is food safe and BPA free making it suitable for storing liquids for human consumption including drinking water, milk, alcohol and oils. As this IBC is also UN approved it is suitable to hold flammable and corrosive liquids.

Black bottle IBC's block out UV rays allowing the contents to remain fresh for longer when compared to a standard translucent bottle. The promotion of green water and algae is also reduced as the black inner bottle hides the contents of the IBC, making them suitable for holding waste from welfare units and toilet blocks.

Features:

 	1000L (220 gallons) capacity
 	Bottom Outlet - 50mm (2 inch) integrated butterfly valve - S60x6 male thread
 	Top Inlet - 150mm (6 inch) non-vented cap
 	Plastic pallet - Strong and durable
 	UN approved for storage of hazardous goods
 	Food grade and suitable for drinking water
 	BPA Free
 	Tamper evident seals
 	Stackable design
 	A maximum liquid density of 1.9
 	Maximum stacking height (empty): x4 IBCs
 	Maximum stacking height (full): x2 IBCs

What is an IBC?

Intermediate bulk containers (IBC) are reusable industrial containers, which are designed for the safe transportation and storage of bulk liquids. They are stackable containers, mounted on a pallet that is designed to be moved using a forklift or pallet jack.

The tubular galvanised steel frame around the container guarantees utmost stability. This also fits perfectly into the grooves of a plastic pallet; both below and above the container which enables an exact positioning and problem-free stacking.

Need a bigger IBC? View our full range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


1000 Litre IBC

This 1000 Litre IBC with plastic pallet has a new inner bottle, a new galvanised steel frame and a new lid and valve. The pallet is produced from environmentally friendly post-consumer recycled (PCR) plastic, reducing waste sent to landfill. The inner bottle of this container is manufactured from blow-moulded high-density polyethylene (HDPE) with bevelled edges. It has a classification of non-hazardous liquid storage.

Food safe and BPA free, this IBC is suitable for storing liquids for human consumption, including drinking water, milk, alcohol and oils. As well as this, it meets the strict criteria for Halal and Kosher food production.

Features

 	1000L (220 gallon) capacity
 	Bottom outlet - 50mm (2 inch) integrated butterfly valve - S60x6 male thread
 	Top inlet - 150mm (6 inch) non-vented cap
 	Food-grade and suitable for drinking water
 	Post-Consumer Recycled plastic pallet
 	BPA Free
 	Tamper-evident seals
 	Stackable design
 	Maximum liquid density of 1.6
 	Maximum stacking height (empty): x4 IBCs
 	Maximum stacking height (full): x2 IBCs
 	Conforms to strict Halal and Kosher criteria

What is an IBC?

Intermediate bulk containers (IBC) are reusable industrial containers, which are designed for the safe transportation and storage of bulk liquids. They are stackable containers, mounted on a pallet that is designed to be moved using a forklift or pallet jack.

The tubular galvanised steel frame around the container guarantees utmost stability. This also fits perfectly into the grooves of a plastic pallet; both below and above the container which enables an exact positioning and problem-free stacking.

Need a bigger IBC? View our full range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


600 Litre IBC

This 600 Litre IBC with Plastic Pallet has a new inner bottle, new galvanised steel frame and a new lid and valve. The pallet is produced from environmentally friendly post-consumer recycled (PCR) plastic, reducing waste sent to landfill. The inner bottle of this container is manufactured from blow moulded high-density polyethylene (HDPE) with bevelled edges. It has a classification of non-hazardous liquid storage.

Food safe and BPA free, this IBC is suitable for storing liquids for human consumption including drinking water, milk, alcohol and oils. As well as this, it meets the strict criteria for Halal and Kosher food production. Certificates can be found in the "Product Downloads" section.

Features:

 	600L (132 gallon) capacity
 	Bottom Outlet - 50mm (2 inch) integrated butterfly valve - S60x6 male thread
 	Top Inlet - 150mm (6 inch) non-vented cap
 	Food grade and suitable for drinking water
 	BPA Free
 	Tamper evident seals
 	Stackable design
 	Maximum liquid density of 1.6
 	Maximum stacking height (empty): 4 IBCs/4700kg
 	Maximum stacking height (full): 2 IBCs

What is an IBC?

Intermediate bulk containers (IBC) are reusable industrial containers, which are designed for the safe transportation and storage of bulk liquids. They are stackable containers, mounted on a pallet that is designed to be moved using a forklift or pallet jack.

The tubular galvanised steel frame around the container guarantees utmost stability. This also fits perfectly into the grooves of a plastic pallet; both below and above the container which enables an exact positioning and problem-free stacking.

Need a bigger IBC? View our full range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


300 Litre IBC

Designed with smaller spaces in mind, the compact dimensions of the 300 Litre IBC ensure that the container saves space in production, storage and transport, whilst still holding 300 litres of liquid.

Features

 	Small container for tight spaces / work environments
 	UN approved, suitable for holding hazardous goods
 	Suitable for transport with pallet truck and forklift
 	Advantageous size for liquids with short shelf life
 	Galvanised, easy-to-clean tubular steel frame
 	Inner container made of high-density polyethylene

This 300 litre new IBC with plastic pallet has a new inner bottle, new galvanised steel frame and a new lid and valve. The pallet is produced from environmentally friendly post-consumer recycled (PCR) plastic, reducing waste sent to landfill. The inner bottle of this container is manufactured from blow moulded high-density polyethylene (HDPE) with bevelled edges. It has a classification of non-hazardous liquid storage.

Food safe and BPA free, this IBC is suitable for storing liquids for human consumption including drinking water, milk, alcohol, and oils. As well as this, it meets the strict criteria for Halal and Kosher food production.

With dimensions of 800mm x 600mm x 1000mm, the container even fits through ordinary doorways, and the integrated plastic pallet makes the IBC stackable and easily transported with pallet trucks and forklifts.

What is an IBC?

Intermediate bulk containers (IBC) are reusable industrial containers, which are designed for the safe transportation and storage of bulk liquids. They are stackable containers, mounted on a pallet that is designed to be moved using a forklift or pallet jack.

The tubular galvanised steel frame around the container guarantees utmost stability. This also fits perfectly into the grooves of a plastic pallet; both below and above the container which enables an exact positioning and problem-free stacking.

Need a bigger IBC? View our full range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Collapsible Pallet Stillage

With a base size of 1150mm x 975mm, this collapsible pallet stillage has a solid steel base and 75mm mesh infill to all four sides.

The pallet cage has a removable half drop down gate on the one side and a fully removable gate on the opposite side. Ideal for warehouse use, the pallet stillage cage is fully collapsible and can be conveniently stacked for easy storage

Base Size: 1150mm x 975mm | Overall Height: 1005mm | Internal Height: 800mm | Mesh Size: 75mm x 75mm | Unit Weight: 62.5kg

Need a more heavy duty stillage? View our range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Tilting Skip


Tilting Skip

Enhance your waste management with our Tilting Skip, designed for efficient waste collection and disposal in workshops and factories. Available in 200kg (200 litres) or 400kg (260 litres) capacities, this skip features a sheet steel body on a square frame chassis with a reinforced rim and no sharp edges. Equipped with 200mm diameter wheels for easy manoeuvrability, it includes a safety retaining latch to prevent tipping until released.

CE-marked and compliant with UKCA standards, it’s backed by a 1-year warranty, ideal for manufacturing and industrial settings.

Why Buy Tilting Skip?

 	Proven Reliability: Compact design with reinforced rim for durable waste handling.
 	Safe Operation: Retaining latch ensures controlled tipping for operator safety.
 	Cost-Effective: Competitively priced with a 1-year warranty for long-term value.
 	Versatile Design: Wheels and optional fork guides enhance mobility and forklift compatibility.

Need a more heavy duty skip? View our Tipping Skip  range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


200mm Polyurethane Castors

200mm red none marking polyurethane castors in a set of four comprising two swivel and two swivel braked castors.

Specifications of the 200mm Polyurethane Castors:

Overall Height : 237mm
Wheel Size : 200mm
Tread Width : 50mm
Wheel Type : Red Polyurethane on White Nylon Centre with Roller Bearing
Fixing Plate Size : 135 x 105mm
Bolting Centre : 105 x 80mm
Bolt Size : 10mm

Also included:
Set of 16 bolts, nuts and washers for use with 200mm Polyurethane Castors.

Need a replacement skip? View our ECO Range here and our Heavy Duty range here.
If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Pedestrian Salt Spreader

Keep pathways and walkways ice-free with the Pedestrian Salt Spreader, a push-along gritter designed for small-scale winter maintenance in commercial and residential settings. With a 50kg capacity, this lightweight spreader is suitable only for use with Dry White Rock Salt, ensuring efficient salt distribution for safe, accessible surfaces. Its simple, robust design requires minimal maintenance, making it an ideal solution for quick and effective ice management.

Fully compliant with the Machinery Directive (2006/42/EC), this salt spreader is UKCA-marked and comes with a 1-year warranty and a Certificate of Conformity.

Features & Benefits

 	Compact Capacity: 50kg capacity for efficient spreading of Dry White Rock Salt on pathways.
 	Easy Operation: Push-along design for simple, manual use with no power requirements.
 	Low Maintenance: Robust construction ensures minimal upkeep and reliable performance.
 	Compliance & Warranty: UKCA-marked with a 1-year warranty.

Contact us for more details on this pedestrian spreader.

Like all our forklift attachments, this pedestrian salt spreader comes supplied fully tested and certified for compliance with the latest Health & Safety Regulations.

N.B. For gritting purposes, this unit is only suitable for use with dry white rock salt only

View our full range of Salt Spreaders & Snow Ploughs here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Teleskip - 500L


Teleskip - 750L


Teleskip - 1250L


Teleskip - 1750L


Teleskip

Our Teleskip has been designed to reduce risk and increase efficiency. Simply drive your forks into the pockets and the automatic mechanism will lock itself on to the forks of the Telehandler when elevated, ensuring the Telehandler Driver can stay in the safety of his cab while both lifting and emptying.

All are made to order. A house builder favourite!

Key Features of the Teleskip:

 	Automatic fork engagement and locking
 	Reinforced folded and welded top edge
 	Stackable
 	Fully welded body to prevent leakage
 	Mechanical locking mechanism
 	Painted finish
 	Differing colours for waste separation available

Need a standard auto release tipping skip? View our standard skip here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


200mm Rubber/Aluminium Castors

200mm rubber/aluminium castors in a set of four comprising two fixed and two swivel braked castors.

Specifications of the 200mm rubber/aluminium castors:

Overall Height : 240mm
Wheel Size : 200mm
Tread Width : 45mm
Wheel Type : Rubber Tyre on Aluminium With Ball Bearings
Fixing Plate Size : 137x105mm
Bolting Centres : 105x80mm
Bolt Size : 10mm
Swivel Radius : 155mm (Swivel)
Swivel Radius : 155mm (Brake)

Also included:
Set of 16 bolts nylock nut & washer kit M10 x 30
(Fitting Bolt, nut and washer set for use with 200mm rubber/aluminium castors.)
Fitting kit for castors with 105x80 bolt centre and for use for bolting to material of 8-10mm depth
set of 4 bolts nylock nut & washer kit M10 x 30
Thread Diameter 10mm
Thread Length 30mm
Thread Length (Fitted) 30mm
Total Length Inc Head 37mm

For advice on castors please email or call.

Need a replacement skip? View our ECO Range here and our Heavy Duty range here.
If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


150mm Polyurethane Castors

150mm red none marking polyurethane castors in a set of four comprising two swivel and two swivel braked castors.

Specifications of the 150mm Polyurethane Castors:

Overall Height : 185mm
Wheel Size : 150mm
Tread Width : 45mm
Wheel Type : Red Polyurethane on White Nylon Centre with Roller Bearing
Fixing Plate Size : 135 x 105mm
Bolting Centre : 105 x 80mm
Bolt Size : 10mm

Also included:
Set of 16 bolts nylock nut & washer kit M8 x 20
(Fitting Bolt, nut and washer set for use with 150mm Polyurethane Castors.)
Fitting kit for castors with 80x60 bolt centre and for use for bolting to material of 8-10mm depth
set of 4 bolts nylock nut & washer kit M8 x 20Thread Diameter 8mm
Thread Length 20mm
Thread Length (Fitted) 20mm
Total Length Inc Head 26mmFor advice on castors please email or call.
Need a replacement skip? View our ECO Range here and our Heavy Duty range here.
If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


125mm Polyurethane Castors

125mm red none marking polyurethane castors in a set of four comprising two swivel and two swivel braked castors.

Specifications of the 125mm Polyurethane Castors:

Overall Height : 152mm
Wheel Size : 125mm
Tread Width : 40mm
Wheel Type : Red Polyurethane on Black Nylon Roller Bearing
Fixing Plate Size : 105 x 85mm
Bolting Centre : 80 x 60mm
Bolt Size : 8mm

Also included:
Set of 16 bolts nylock nut & washer kit M8 x 20
(Fitting Bolt, nut and washer set for use with 125mm Polyurethane Castors.)
Fitting kit for castors with 80x60 bolt centre and for use for bolting to material of 8-10mm depth
set of 4 bolts nylock nut & washer kit M8 x 20Thread Diameter 8mm
Thread Length 20mm
Thread Length (Fitted) 20mm
Total Length Inc Head 26mmFor advice on castors please email or call.
Need a replacement skip? View our ECO Range here and our Heavy Duty range here.
If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


100mm Polyurethane Castors

100mm red none marking polyurethane castors in a set of four comprising two swivel and two swivel braked castors.

Specifications of the 100mm Polyurethane Castors:

Overall Height : 128mm
Wheel Size : 100mm
Tread Width : 34mm
Wheel Type : Red Polyurethane on Black Nylon Roller Bearing
Fixing Plate Size : 105 x 85mm
Bolting Centre : 80 x 60mm
Bolt Size : 8mm

Also included:
Set of 16 Bolts Nylock Nut & Washer Kit M8 x 20
(Fitting Bolt, nut and washer set for use with 100mm Polyurethane Castors.)
Fitting Kit for Castors with 80x60 Bolt Centre, and for use for Bolting to Material of 8-10mm Depth
Set of 4 Bolts Nylock Nut & Washer Kit M8 x 20Thread Diameter 8mm
Thread Length 20mm
Thread Length (Fitted) 20mm
Total Length Inc Head 26mm

For advice on castors please email or call.

Need a replacement skip? View our ECO Range here and our Heavy Duty range here.
If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Yard Scraper

A Yard Scraper that is angled to clear mud, dirt, snow to the left & comes fitted as standard with a heavy duty steel wear-strip.

1500mm L, Fork Tunnels 160mm x 80mm. Centres are 800mm. Blade is 25mm thick.

Replacement blades are available at £99 plus VAT.

Do you need a replacement Tipping Skip? View it here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


250L 'SafeTub' Mortar Tub

Our 250L 'SafeTub' Mortar Tub has a ribbed body for added strength and enclosed feet making lifting mortar at height safer.

Working at height, especially when lifting materials, can be dangerous. Standard mortar tubs are more likely to fall as they have no enclosed feet stopping movement. The 250L 'SafeTub' Mortar Tub reduces.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Dust Suppression Attachment with Valve

Our dust suppression attachment with a valve, manufactured by Tipping Skips, is designed to fit most IBCs and is a much more cost effective way to keep dust at bay on site. This new version includes a valve enabling you to extend the life of an IBC with a broken tap.

The valve controls the flow of water through the attachment rather than through the IBC.

Simply unscrew the cap from any (ideally) full IBC, anywhere on site, screw this unit in place and once on the forks of the telehandler simply turn the tap on.

The unit has been carefully designed to spray the water coming from the IBC as far as possible not just forwards but to the side. It is also very slightly narrower than the tank to prevent damage. It has been designed to have no moving parts and relies on gravity to spread the water.

View the first unit in action here.

Not what you need? View our Specials range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.

Buy direct from DustSuppressor.co.uk using this link.


1750L ECO Tipping Skip Goosewing Grey

The 1750L ECO Tipping Skip Goosewing Grey is the ideal way to transfer materials and rubbish. The Economy model’s body is manufactured in 3mm-plate steel, reinforced with an angle top.

Standard features of the 1750L ECO Tipping Skip Goosewing Grey:

 	The base has either a 4-way entry or 2-way entry (suitable for castors).
 	Tip handle, self return and automatic reset mechanism.
 	Hopper Body with folded top edges.
 	Heavy Duty easy action handle complete with safety catch.
 	One way entry base frame as standard (3-way optional).
 	Fitted with heavy-duty safety chain.

Available in other sizes:

Capacity (litres)
Length
Width
Height
Max SWL (kg)
Net Weight (kg)

750
1550
1260
860
1400
230

1250
1770
1320
1100
2000
245

1750
1840
1340
1280
2000
295

Need a more heavy duty skip? View our Heavy Duty range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


750L ECO Tipping Skip Grey

The 750L ECO Tipping Skip Grey is the ideal way to transfer materials and separate rubbish. The Economy model’s body is manufactured in 3mm-plate steel, reinforced with an angle top.

Standard features of the 750L ECO Tipping Skip Grey:

 	The base has either a 4-way entry or 2-way entry (suitable for castors).
 	Tip handle, self return and automatic reset mechanism.
 	Hopper Body with folded top edges.
 	Heavy Duty easy action handle complete with safety catch.
 	One way entry base frame as standard (3-way optional).
 	Fitted with heavy-duty safety chain.

Available in other sizes:

Capacity (litres)
Length
Width
Height
Max SWL (kg)
Net Weight (kg)

750
1550
1260
860
1400
230

1250
1770
1320
1100
2000
245

1750
1840
1340
1280
2000
295

Need a more heavy duty skip? View our Heavy Duty range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


1250L ECO Tipping Skip Grey

The 1250L ECO Tipping Skip Grey is the ideal way to transfer materials and rubbish. The Economy model’s body is manufactured in 3mm-plate steel, reinforced with an angle top.

Standard features of the 1250L ECO Tipping Skip Grey:

 	The base has either a 4-way entry or 2-way entry (suitable for castors).
 	Tip handle, self return and automatic reset mechanism.
 	Hopper Body with folded top edges.
 	Heavy Duty easy action handle complete with safety catch.
 	One way entry base frame as standard (3-way optional).
 	Fitted with heavy-duty safety chain.

Available in other sizes:

Capacity (litres)
Length
Width
Height
Max SWL (kg)
Net Weight (kg)

750
1550
1260
860
1400
230

1250
1770
1320
1100
2000
245

1750
1840
1340
1280
2000
295

Need a more heavy duty skip? View our Heavy Duty range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Heavy Duty Wheelie Bin Rotator - Loop Chain


Heavy Duty Wheelie Bin Rotator - Crank Handle


Heavy Duty Wheelie Bin Rotator

Our premium Heavy Duty Wheelie Bin Rotator comes fitted with a high quality gearbox, that allows the wheelie bins to be rotated and emptied in a safe and controlled manner without the need to push the wheelie bin against the side of waste receptacle. This gives the added benefit of being able to fill the waste receptacle from all angles, thus ensuring maximum fill capacity is achieved.

The wheelie bins are securely fastened to the wheelie bin rotator by means of webbing and ratchet straps, and with the option of crank handle, loop chain or hydraulic rotation, this model can cater for all requirements.

Our forklift wheelie bin rotator offers a quick, simple and safe method of lifting and emptying large wheelie bins.

Key features:

• Suitable for use with 660 - 1100 litre wheelie bins, offering flexibility of use over the most popular size of large wheelie bins

• Simple operation allows wheelie bins to be tipped and emptied without manual handling, thus reducing risk of injury

• High quality gearbox allows wheelie bins to rotate in mid air, therefore allowing access to all areas of the wheelie bin for cleaning or repair

• Rotation functionality eliminates the need to push the wheelie bin against side of waste receptacle therefore allowing receptacle to be filled to maximum capacity

• Heel pin retention to forklift forks ensure the wheelie bin handler is safely secured to the forklift truck during operation

• Painted in high gloss yellow finish to highlight visibility on forklift truck

• 'CE' marked and supplied with Certificate of Conformity to comply with Health & Safety Regulations

Need a tipping skip? View our full range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Access Platform - Red


Access Platform - Yellow


Access Platform

Our best-selling Access Platform, this forklift safety cage is suitable for 1-2 people and has 'step-through' rails for entry.

The platform size is 1000mm x 1000mm and suitable for use with forklift forks up to 150mm wide x 60mm thick. The fork spread is set at 940mm (outside to outside)

If you are in a position where you need to carry out emergency/un-scheduled high-level work such as building repair, lightbulb changing, etc then this forklift access platform offers a safe, reliable, and low-cost solution for such tasks

The forklift safety cage is fully PM28 compliant

Supplied with 3 year warranty, fully tested & certificated.

Key Features:

• PM28 compliant

• Step through rails for entry providing a protective barrier when operating at height

• Security locking system to fork heels ensure the work platform is safely secured to the lift truck

• Full length fork pockets to provide complete platform stability

• Harness anchorage points and in-board handholds points for operator safety

• Perforated back mesh ensures there is a barrier between the platform user and the hazardous areas of the lift truck

• Anti slip floor tread with drain holes to avoid accumulation of water and risk of slipping

• Kick rail to all sides prohibits items left on the floor from falling out at height (i.e. work tools)

• Provided with full safety livery and technical rating plate

View our full range of Access Platforms here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Towable Salt Spreader

The forklift towable salt spreader is perfect for towing behind vehicles with standard ball hitch or towing pins. With no electrical or auxiliary valve connection required to the forklift, this mechanically driven salt gritter is simple yet effective to use for all ice gritting applications.

With a large 190-litre capacity hopper and flow control lever, our forklift towable salt spreader will ensure your operations keep moving during the winter months.

An added benefit of our forklift towable salt gritter is that during the summer months, the unit can also be used as seed, fertiliser, or grass spreader.

Features & Benefits

 	Axle driven, requiring no belts, chains or electrical connection
 	Large 190 litre capacity hopper produced from 3mm pressed steel for durability
 	Supplied with towing eye and hitch for tow ball, making it suitable for a range of vehicles
 	Galvanised actuator ensures the salt does not clog, thus allowing for a smooth even spread
 	Flow control lever which allows the operator to control the spread and coverage
 	Mounted on large pneumatic tyres

Like all our forklift attachments, this forklift salt gritter comes supplied fully tested and certified for compliance with the latest Health & Safety Regulations.

N.B. For gritting purposes, this unit is only suitable for use with dry white rock salt only

View our full range of Salt Spreaders & Snow Ploughs here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Canvas Lid & Hooks (Kit) - 750L ECO, Black


Canvas Lid & Hooks (Kit) - 750L ECO, Blue


Canvas Lid & Hooks (Kit) - 1250L ECO, Black


Canvas Lid & Hooks (Kit) - 1250L ECO, Blue


Canvas Lid & Hooks (Kit) - 1750L ECO, Black


Canvas Lid & Hooks (Kit) - 1750L ECO, Blue


Canvas Lid & Hooks (Kit) - 350L Heavy Duty, Black


Canvas Lid & Hooks (Kit) - 350L Heavy Duty, Blue


Canvas Lid & Hooks (Kit) - 500L Heavy Duty, Black


Canvas Lid & Hooks (Kit) - 500L Heavy Duty, Blue


Canvas Lid & Hooks (Kit) - 750L Heavy Duty, Black


Canvas Lid & Hooks (Kit) - 750L Heavy Duty, Blue


Canvas Lid & Hooks (Kit) - 1200L Heavy Duty, Black


Canvas Lid & Hooks (Kit) - 1200L Heavy Duty, Blue


Canvas Lid & Hooks (Kit) - 1600L Heavy Duty, Black


Canvas Lid & Hooks (Kit)

Our Tipping Skip Canvas Lid & Hooks (Kit) is available for immediate dispatch so you can cover any size Tipping Skips on site.

These kits come with one canvas cover and all the hooks needed to permanently attach to your skip. You will need to be able to spot weld the hooks to the side of the skip and this service is not included in this price.

Colours may vary and image is for illustration purposes only.

Do you need a replacement Tipping Skip? View it here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


1.5m Release Handle

Our 1.5m Release Handle is ideal when you need to tip at height. Simply set the skip where you need to tip, hook the release handle through the hole on the tipping skip handle and pull. This triggers the tipping mechanism and the skip will empty.

The Release Handle is often stored or secured to the forklift truck so it is available when needed.

Need a replacement skip? View our ECO Range here and our Heavy Duty range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Gas Strut

Our Gas Struts are available for immediate dispatch so you can repair any damaged Auto Locking Tipping Skips on site.

Simply unbolt the damaged gas strut while either slightly raised by the telehandler or by placing the skip on its side. The new gas strut is simply aligned and bolted in place.

Do you need a replacement Auto Locking Tipping Skip? View it here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Tipping Skips Spring

Our Tipping Skip Springs are available for immediate dispatch so you can repair any damaged Tipping Skips on site.

Broken springs can be easily replaced quickly to ensure continued use of tipping skips.

Do you need a replacement Tipping Skip? View it here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Snow Plough

Our NEW Snow Plough that is angled to clear snow to the left& comes fitted as standard with a heavy duty wear-strip.

1500mm L, Fork Tunnels 160mm x 80mm. Centres are 800mm. Blade is 25mm thick.

Replacement blades are available at £99 plus VAT.

Do you need a replacement Tipping Skip? View it here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Universal Drum Grab

Our Universal Drum Grab incorporates a quick-slide-two-position adjustor that allows both steel and 'L' & 'XL' ring plastic drums to be picked up. Handling these two popular types of drum the universal drum handler is well suited for low to medium movement of drums around the factory or store.

The steel drums are handled by the Universal Drum Grab via the 'rolling' hoops while the 'L' and 'XL' ring plastic drums are handled via the underside of the drum lip.  Zinc plated fork screws provide complete security to ensure the drum handler is secured to the forks of the forklift truck

Key features:

• Suitable for use with 210 litre steel drums and 'L' & 'XL' ring plastic drums, allows these common drums to be handled with no risk of injury

• Ample sized fork pockets to suit most fork trucks, no need to risk back strain through manual handling

• Simple design with few moving parts offering low maintenance and servicing costs

• Fully automatic in operation, reducing time and labour costs

• Quick and easy to fit on and off the forklift with heavy duty zinc plated screw clamps for safe securing to forklift

• 'CE' marked and supplied with Certificate of Conformity for Health & Safety Regulations

Hoses not supplied.

Need another attachment? View our Lifting Equipment range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Universal Two Drum Grab

Designed to handle two drums at the same time, our Universal Two Drum Grab comes with a  quick-slide-two-position adjustor that allows both steel and 'L' & 'XL' ring plastic drums to be picked up.

With the ability to handle both steel and plastic drums, one and two at a time, this universal forklift drum handler can add versatility and efficiency to your drum handling operations.

Fully automatic in operation, the Universal Two Drum Grab simply locates underneath the 'rolling hoops' of the steel drums, or underneath the lip of the plastic drum, and tightens its grip once lifting commences. No manual handling of drums are required, thus reducing risk of injury whilst increasing on site Health & Safety.

With heavy duty zinc plated screw clamps for securing the drum handler safely to the lift truck forks, this drum handler is  a simple, low cost yet effective attachment for fulfilling your drum handling requirements

Key features:

• Suitable for use with 210 litre steel drums and 'L' & 'XL' ring plastic drums, allows these common drums to be handled with no risk of injury

• Ample sized fork pockets to suit most fork trucks, no need to risk back strain through manual handling

• Simple design with few moving parts offering low maintenance and servicing costs

• Fully automatic in operation, reducing time and labour costs

• Quick and easy to fit on and off the forklift with heavy duty zinc plated screw clamps for safe securing to forklift

• 'CE' marked and supplied with Certificate of Conformity for Health & Safety Regulations

Hoses not supplied.

Need another attachment? View our Lifting Equipment range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Gas Bottle Handler

This Gas Bottle Handler is designed to safely allow gas cylinders to be transported without the need for manual handling.  The Gas Bottle Handler is supplied with fork pockets to enable quick and simple fitment to the lift truck. Webbing and ratchet straps can be tensioned to the required size to ensure the gas cylinders are secured.

The Gas Bottle Handler can handle a variety of sizes ranging from 240mm diameter Butane gas bottles to 318mm diameter Propane gas bottles. Please refer to the below table for further information.

Key features:

• Suitable for use with a wide variety of gas bottle dimensions for maximum useability

• Quick and easy webbing and ratchet strap assembly for safe securing of gas bottles

• Low profile base allows easy loading of gas bottles to reduce manual handling

• Heel pin retention to forklift forks ensures the gas bottle handler is safely secured to lift truck

• Painted in safety yellow gloss finish to aid visibility when fitted to the lift truck

• 'CE' marked and supplied with Certificate of Conformity for Health & Safety Regulations

Need another attachment? View our Lifting Equipment range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Pallet Rotator

The Pallet Rotator allows safe and simple pallet pick up and rotation. The fork tines are adjustable (550 - 806mm) to suit most pallet sizes. A high quality wormed gearbox allows controlled rotation of the forks via a crank handle. The front section of the pallet rotator can be rotated through 360 degrees.

The Pallet Rotator offers a clever solution to emptying contents off a pallet whilst eliminating the need for manual handling.

Key features:

• High quality gear box allows effortless and controlled pallet rotation with no manual handling

• Adjustable fork tines allow maximum flexibility for handling different pallet sizes

• 360 Degree rotation ensures pallet contents are tipped completely, reducing manual handling and risk of injury

• Heel retention ensures the pallet rotator is safely secured to the lift truck forks

• 'CE' marked and supplied with Certificate of Conformity for Health & Safety Regulations

Need another attachment? View our Lifting Equipment range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Self-Levelling Pallet Crane Forks - 3000


Self-Levelling Pallet Crane Forks - 2000


Self-Levelling Pallet Crane Forks

The Self-Levelling Pallet Crane Forks come with the added benefit of a high quality double spring mechanism which provides smooth and reliable self balancing action and ensures the forks are level when loaded. The springs in the Self-Levelling Pallet Crane Forks are fully enclosed within protective steel cylinders.

Please Note: 2000kg Capacity - Minimum load required to activate the spring loaded head is 200kgs

3000kg Capacity - Minimum load required to activate the spring loaded head is 600kgs

Key features:

• Allow pallets to be picked up and moved using an overhead or lorry mounted crane

• Self levelling head automatically adjusts to the weight of the pallet

• Adjustable width and height for load handling flexibility

• 'CE' marked and supplied with Certificate of Conformity for Health & safety Regulations

Need a different type of lifting attachment? View our full range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Single Kerb Lifting Grab

We offer a range of mechanical scissor grabs, including this Single Kerb Lifting Grab, designed to lift a variety of construction products such as, bricks, blocks, kerbs and slabs, both on-site and in builder's merchant yards. In addition, these mechanical brick and block scissor grabs save time and money across diverse manufacturing and engineering sectors, including ports and off-shore.

The brick and block  grabs are purely mechanical in operation and require no hydraulic or electrical services. The design of the scissor grabs is efficient and rugged, with a superb build quality, allowing the grabs to operate reliably and safely in the toughest of environments.

Please Note: A self locating yoke would be required for connecting the scissor grabs to the forks of a forklift

Key features of the Single Kerb Lifting Grab:

Suitable for lifting kerbs width ways

 	'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another attachment? View our Lifting Equipment range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Kerb/Slab Lifting Grab

We offer a range of mechanical scissor grabs, including this Kerb/Slab Lifting Grab, designed to lift a variety of construction products such as, bricks, blocks, kerbs and slabs, both on-site and in builder's merchant yards. In addition, these mechanical brick and block scissor grabs save time and money across diverse manufacturing and engineering sectors, including ports and off-shore.

The brick and block  grabs are purely mechanical in operation and require no hydraulic or electrical services. The design of the scissor grabs is efficient and rugged, with a superb build quality, allowing the grabs to operate reliably and safely in the toughest of environments.

Please Note: A self locating yoke would be required for connecting the scissor grabs to the forks of a forklift

Key features of the Kerb/Slab Lifting Grab:

Suitable for lifting kerbs and slabs

 	'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another attachment? View our Lifting Equipment range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Kerb Stone Lifter

We offer a range of mechanical scissor grabs, including this Kerb Stone Lifter, designed to lift a variety of construction products such as, bricks, blocks, kerbs and slabs, both on-site and in builder's merchant yards. In addition, these mechanical brick and block scissor grabs save time and money across diverse manufacturing and engineering sectors, including ports and off-shore.

The brick and block  grabs are purely mechanical in operation and require no hydraulic or electrical services. The design of the scissor grabs is efficient and rugged, with a superb build quality, allowing the grabs to operate reliably and safely in the toughest of environments.

Please Note: A self locating yoke would be required for connecting the scissor grabs to the forks of a forklift

Key features of the Kerb Stone Lifter:

Suitable for lifting single layers of kerb stones

 	'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another attachment? View our Lifting Equipment range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Adjustable Grab

We offer a range of mechanical scissor grabs, including this Adjustable Grab, designed to lift a variety of construction products such as, bricks, blocks, kerbs and slabs, both on-site and in builder's merchant yards. In addition, these mechanical brick and block scissor grabs save time and money across diverse manufacturing and engineering sectors, including ports and off-shore.

The brick and block  grabs are purely mechanical in operation and require no hydraulic or electrical services. The design of the scissor grabs is efficient and rugged, with a superb build quality, allowing the grabs to operate reliably and safely in the toughest of environments.

Please Note: A self locating yoke would be required for connecting the scissor grabs to the forks of a forklift

Key features of the Adjustable Grab:

Suitable for lifting either single or double layers of kerbs, and some brick packs

 	'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another attachment? View our Lifting Equipment range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Brick Pack Grab

We offer a range of mechanical scissor grabs, including this Brick Pack Grab, designed to lift a variety of construction products such as, bricks, blocks, kerbs and slabs, both on-site and in builder's merchant yards. In addition, these mechanical brick and block scissor grabs save time and money across diverse manufacturing and engineering sectors, including ports and off-shore.

The brick and block  grabs are purely mechanical in operation and require no hydraulic or electrical services. The design of the scissor grabs is efficient and rugged, with a superb build quality, allowing the grabs to operate reliably and safely in the toughest of environments.

Please Note: A self locating yoke would be required for connecting the scissor grabs to the forks of a forklift

Key features of the Brick Pack Grab:

Suitable for lifting bricks, blocks, pavers or kerbs

 	'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another attachment? View our Lifting Equipment range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Pallet Crane Forks - 3000


Pallet Crane Forks - 2000


Pallet Crane Forks

Our Pallet Crane Forks allow pallets to be picked up and moved using an overhead or lorry mounted crane. The bow & eye head of these Pallet Crane Forks offers notched lifting positions for picking up empty or loaded pallets.

The design of these A frame Pallet Crane Forks, offers an extremely strong yet lightweight product, and an ideal choice where adjustability is not an issue.

Key features:

• Allows pallets to be picked up and moved using an overhead or lorry mounted crane

• Bow & Eye head offers notched lifting positions for picking up pallets

• Three lifting positions, 800mm/1000/1200mm,  for handling various pallet sizes

• 'CE' marked and supplied with Certificate of Conformity to comply with Health & Safety Regulations

Need a different type of lifting attachment? View our full range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Calibrated Multi Purpose Forklift Scoop


Calibrated Multi Purpose Forklift Scoop

The Calibrated Multi Purpose Forklift Scoop is calibrated, stamped by the Trading Standards Department & ideal for point of sale measurement.

The long reach of this Calibrated Multi Purpose Forklift Scoop allows discharge of materials into the centre of a lorry, whilst the small tipping arc, makes the scoop perfect for discharge where headroom is confined.

Manufactured from robust and durable heavy duty thick steel and with simple mechanical operation incorporating an easy to release tipping handle, our calibrated Multiscoop is the perfect choice for many of our customers when it comes point of sale measurement and loading of loose material.

Large 'T' screw retention ensures the forklift bucket is securely fastened to the lift truck.

Key features:

• Calibrated by the Trading Standards Department, allows for accurate measurement at point of sale

• Bucket positioned forward of truck forks, giving long reach capabilities when it comes to loading into backs of vans or lorries

• Shallow tipping arc allows for tipping in confined headroom, thus reducing cost of manual handling

• Free standing design allows for quick fitment  on and off the forklift, thus reducing downtime and standing time

• Simple mechanical operation offers low maintenance requirements and lower servicing costs

• Large 'T' screw retention to ensure scoop is safely and securely fitted to the forklift truck

• 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another attachment? View our Scoop range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Hydraulic Multi-Purpose Forklift Scoop


Hydraulic Multi-Purpose Forklift Scoop

The Hydraulic Multi Purpose Forklift Scoop is an Ideal attachment for loading small vans and charging hoppers with the added advantage of being hydraulically operated. The Hydraulic Multi Purpose Forklift Scoop simply requires an auxiliary hydraulic valve on the fork truck to operate.

The long reach design of this Hydraulic Multi Purpose Forklift Scoop means discharging materials into the centre of a lorry is easily achieved, whilst the shallow tipping arc of the bucket also means the scoop is ideal when it comes to loading or unloading when headroom is limited.

Please Note: Supplied without hoses

Key features:

• Hydraulic operation allows tipping from within truck cab, therefore helping to speed up productivity whilst reducing labour costs

• Bucket positioned forward of truck forks, giving long reach capabilities when it comes to loading into backs of vans or lorries

• Shallow tipping arc allows for tipping in confined headroom, thus reducing cost of manual handling

• Free standing design allows for quick fitment  on and off the forklift, thus reducing downtime and standing time

• Large 'T' screw retention to ensure scoop is safely and securely fitted to the forklift truck

• 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another attachment? View our Scoop range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Carriage Mounted Hydraulic Forklift Bucket


The Carriage Mounted Hydraulic Forklift Bucket is designed to mount directly to the carriage (Class 2A)  of the forklift truck, this hydraulically operated scoop is simply connect to the auxiliary valve on the fork truck to operate. By mounting this Carriage Mounted Hydraulic Forklift Bucket to directly to the truck carriage, you will be turning your forklift truck into a dedicated loader, which in turn can diminish the need for buying in extra plant machinery

With a volumetric capacity ranging from 0.2m3 to 1.0m3, our Carriage Mounted Hydraulic Forklift Bucket is suitable for use for a wide range of loading and unloading  applications.

Due to the hydraulic function, the tipping bucket has a infinitely controllable discharge rate, therefore helping to reduce product spillage and reducing wastage costs.

Please Note: Supplied without hoses.

Key features:

• Mounted directly onto the forklift truck carriage for converting forklift into a dedicated loader, reducing the need and cost for extra plant machinery

• Hydraulic operation allows tipping from within truck cab, therefore helping to speed up productivity whilst reducing labour costs

• Infinitely controllable discharge rate to reduce product spillage and wastage costs

• Shallow tipping arc allows for tipping in confined headroom, thus reducing cost of manual handling

• 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another attachment? View our Scoop range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


ECO Forklift Scoop

One of our best selling mechanical forklift scoops, our ECO Forklift Scoop offers fantastic value for money and is ideally suited where exact measurement of contents is not important.

This ECO Forklift Scoop is manufactured to a strong and sturdy design and will offer a service life for many years to come.

A simple to operate release handle allows the scoop to be tipped with ease, and with large fork screw clamps, the scoop is safely retained to the forklift truck.

Key features:

• Forks fit low into the scoop bucket therefore giving high lift capabilities

• Open design allows a large variety of products to be handled, which in turn can help reduce yard clearing and waste handling costs

• Free standing design allows for quick fitment  on and off the forklift, thus reducing downtime and standing time

• Simple mechanical operation offers low maintenance requirements and lower servicing costs

• Large 'T' screw retention to ensure scoop is safely and securely fitted to the forklift truck

• 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another attachment? View our Scoop range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Multi Purpose Forklift Scoop


Multi Purpose Forklift Scoop

Our Multi Purpose Forklift Scoop is the ideal scoop when it comes to loading small vans and charging hoppers. The long reach of our Multi Purpose Forklift Scoop allows discharge of materials into the centre of a lorry, whilst the small tipping arc, makes the scoop perfect for discharge where headroom is confined.

Manufactured utilsing a heavy duty design, this forklift scoop is mechanical in operation and comes with an easy to operate tipping mechanism.

Securement of the forklift scoop to the forklift truck is via large 'T' screw retention.

A multi purpose forklift scoop that has been a firm favourite for our customers over many years.

Key features:

• Bucket positioned forward of truck forks, giving long reach capabilities when it comes to loading into backs of vans or lorries

• Shallow tipping arc allows for tipping in confined headroom, thus reducing cost of manual handling

• Free standing design allows for quick fitment  on and off the forklift, thus reducing downtime and standing time

• Simple mechanical operation offers low maintenance requirements and lower servicing costs

• Large 'T' screw retention to ensure scoop is safely and securely fitted to the forklift truck

• 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another attachment? View our Scoop range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Forklift Hydraulic Bucket - 0.2


Forklift Hydraulic Bucket - 0.4


Forklift Hydraulic Bucket - 0.5


Forklift Hydraulic Bucket

Our Forklift Hydraulic Bucket features hydraulic tipping and simply requires an auxiliary hydraulic valve on the forklift truck to operate. Ideally suited for handling sand, gravel and aggregate, the Forklift Hydraulic Bucket offers a compact design with easy filling characteristics and good manoeuvrability.

Manufactured from robust and durable heavy duty thick steel, this Forklift Hydraulic Bucket has an under-slung design, which positions the scoops bucket close to the forklift. The benefit of this under-slung design is that smaller forklifts with smaller lifting capacities can be used as the load centre (distance from truck to attachment) is kept to a minimum.

Heel pin retention ensures the forklift bucket is safely and securely fastened to the lift truck.

Please Note: Supplied without hydraulic hoses.

Key features:

• Hydraulic operation allows the scoop to be tipped and operated from within the truck cab, therefore speeding up operations and increasing productivity

• Under-slung bucket below forklift forks brings the scoop closer to the forklift mast, therefore allowing for smaller forklifts with smaller lifting capacities to be used

• Strong compact design for durability and long service life

• Free standing design allows for quick fitment  on and off the forklift, thus reducing downtime and standing time

• Simple mechanical operation offers low maintenance requirements and lower servicing costs

• Heel pin retention to ensure scoop is safely and securely fitted to the forklift truck

• 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another attachment? View our Scoop range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


High Lift Scoop


High Lift Scoop

The High Lift Scoop is an ideal attachment for high and long reach capabilities where exact measurement of contents is not important. Ideal for picking up overspill or dross in a processing area.

Produced to a heavy duty design the High Lift Scoop comes with an easy to operate mechanial tipping mechanism and is ideal the ideal scoop for shovelling general waste and yard debris.

Large 'T' screw retention ensures the forklift bucket is securely fastened to the lift truck.

Key features:

• Forks fit low into the scoop bucket therefore giving high lift capabilities

• Open design allows a large variety of products to be handled, which in turn can help reduce yard clearing and waste handling costs

• Free standing design allows for quick fitment  on and off the forklift, thus reducing downtime and standing time

• Simple mechanical operation offers low maintenance requirements and lower servicing costs

• Large 'T' screw retention to ensure scoop is safely and securely fitted to the forklift truck

• 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another attachment? View our Scoop range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Fixed Blade Snow Plough


Fixed Blade Snow Plough

A Fixed Blade Snow Plough that is angled to clear snow to the left.  The snow plough comes fitted as standard with a heavy duty steel wearstrip with the additional option of having a 20mm thick rubber blade insert fitted if desired.

Utilising a heavy duty rolled steel blade, our Fixed Blade Snow Plough attachment is designed to work in the most arduous of snow conditions and is more than suitable for ploughing fresh or hard compacted frozen snow.

Large 'T' screw fork clamps ensure the snow plough is secured to the forklift forks at all times

Please Note: Image shown is with rubber blade insert fitted

Key features:

• Heavy duty steel blade rolling for complete durability and longevity

• Angled blade, ensures snow is pushed away to one side when ploughing

• Heavy duty steel wearstrips fitted as standard to all models with the option of additional 20mm thick rubber blade inserts

• Generous sized fork pockets, ensures the forklift snow plough will fit most fork trucks, thus maximising use of available plant machinery

• Quick and easy to fit on and off the forklift forks via zinc plated safety screw clamps

• No moving parts, offering low maintenance and servicing costs

• 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another sweeper attachment? View our Sweeper range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Sprung Loaded Snow Plough - 1525


Sprung Loaded Snow Plough - 1830


Sprung Loaded Snow Plough - 2130


Sprung Loaded Snow Plough

Our deluxe Sprung Loaded Snow Plough comes with full adjustment to the blade, allowing the snow plough to sweep left, right or straight ahead.  Additional heavy duty shock absorbing springs are also fitted as standard to this snow plough, making the attachment ideal for clearing areas where hidden objects such as raised man hole covers etc are likely to be encountered.

Along with the heavy duty steel wear-strip that we provide with all our forklift snow ploughs, castors and rubber blade inserts are also standard features with this Sprung Loaded Snow Plough.

Fresh snow or compacted frozen snow, by using a heavy duty steel rolled blade in the design of all our forklift ploughs, you can be assured our ploughs will be fit for purpose, whatever the conditions.

Key features:

• Sprung loaded blade to minimise risk of damage to the snow plough should hidden raised objects be encountered

• Simple and easy adjustable plough blade allows snow plough to sweep to the  left, right or straight ahead

• Heavy duty steel blade rolling for complete durability and longevity

• Angled blade, ensures snow is pushed away to one side when ploughing

• Heavy duty steel wearstrips fitted as standard to reduce wear and tear

• Additional 20mm thick rubber blade insert (replaceable) for added wear and tear protection

• Castors fitted to underside of snow plough to aid with movement

• Generous sized fork pockets, ensures the forklift snow plough will fit most fork trucks, thus maximising use of available plant machinery

• Quick and easy to fit on and off the forklift forks via zinc plated safety screw clamps

• No moving parts, offering low maintenance and servicing costs

• 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another sweeper attachment? View our Sweeper range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Adjustable Snow Plough - 1525


Adjustable Snow Plough - 1830


Adjustable Snow Plough - 2130


Adjustable Snow Plough

Offering more features than our standard fixed blade snow plough, our Adjustable Snow Plough range comes with full adjustment to the blade, allowing the snow plough to sweep left, right or straight ahead.  Along with the heavy duty steel wearstrip that we provide with all our forklift snow ploughs, castors and rubber blade inserts are also  standard features with this model.

The Adjustable Snow Plough is manufactured using a heavy duty rolled steel blade, so you can be assured whatever the ploughing conditions (even frozen compacted snow), our snow plough will not let you down.

Key features:

• Simple and easy adjustable plough blade allows snow plough to sweep to the  left, right or straight ahead

• Heavy duty steel blade rolling for complete durability and longevity

• Angled blade, ensures snow is pushed away to one side when ploughing

• Heavy duty steel wearstrips fitted as standard to reduce wear and tear

• Additional 20mm thick rubber blade insert (replaceable) for added wear and tear protection

• Castors fitted to underside of snow plough to aid with movement

• Generous sized fork pockets, ensures the forklift snow plough will fit most fork trucks, thus maximising use of available plant machinery

• Quick and easy to fit on and off the forklift forks via zinc plated safety screw clamps

• No moving parts, offering low maintenance and servicing costs

• 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another sweeper attachment? View our Sweeper range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Adaptor Carriage


Adaptor Carriage

The Adaptor Carriage is designed to hang on to the existing forklift carriage to change to a different class, for example to fit a class 2 attachment onto a class 3 truck.

Our Adaptor Carriage is manufactured from high quality 50D Boron steel, offering high abrasive qualities, greatly reducing the wear along the top rails from the forks sliding back and forth.

Key features:

• Manufactured from high quality 50D Boron steel offering very high anti-abrasive qualities and long lasting wearing properties

• Designed to allow an existing truck carriage class to be converted from one carriage class to another, allowing different attachments to be used on the same truck

• 'CE' marked and supplied with Certificate of Conformity for Heath & Safety Regulations

Need another attachment? View our Materials Handling range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Magnetic Forklift Sweeper - 1200


Magnetic Forklift Sweeper - 1500


Magnetic Forklift Sweeper - 1800


Magnetic Forklift Sweeper

The Magnetic Forklift Sweeper is ideal for keeping car parks, container depots and warehouses free from metal debris such as swarf, nails, nuts & bolts etc. The Magnetic Forklift Sweeper simply slides onto the forklift forks, for quick and easy operation.

With a corrosion resistant, robust design, this forklift magnetic sweeper will pick up metal contamination from approx 4-5" off the ground. The magnet surface of the sweeper is easily cleaned, and once your cleaning operations are complete, the forklift magnet can removed for using at a later date.

N.B. This magnet can affect Pacemakers, Credit Cars, Watches and other Electrical Devices - minimum safe distance 1m

Key features:

• Strong magnetism suitable for picking up metal debris from 4-5" off the ground

• 100mm deep x 1200mm wide corrosion resistant magnetic surface

• Robust design providing long service life properties

• 'T' screw retention to forklift forks to ensure magnet is safely secured to the lift truck

• Non magnetised cleaning strip to allow metal debris to be easily brushed off the magnetic surface

• 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Need another sweeper attachment? View our Sweeper range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Dummy Carriage


Dummy Carriage

The Dummy Carriage is designed to hang on to the existing forklift carriage to extend the width, to allow a wider fork spread or to allow four forks to be hung onto the carriage.

Our Dummy Carriage is manufactured from high quality 50D Boron steel, offering high abrasive qualities, greatly reducing the wear along the top rails from the forks sliding back and forth.

Key features:

• Manufactured from high quality 50D Boron steel offering very high anti-abrasive qualities for long lasting wearing properties

• Increases the width of the existing carriage to allow wider loads to be handled

• Manufactured in any width, providing complete flexibility to your requirements

• 'CE' marked and supplied with Certificate of Conformity for Heath & Safety Regulations

Need another attachment? View our Materials Handling range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Adjustable Four Fork Attachment


Adjustable Four Fork Attachment

The Adjustable Four Fork Attachment has been designed for use when handling extra wide pallets or long products such as steel or plastic pipes, steel flats, plastic extrusions or timber.

The added benefit of the adjustable wide load stabilisers is that the two outer forks can be laterally adjusted, ideal for where pallet widths vary or where the pallet bearer position varies substantially

The forklift forks slide into the inner fork sleeves of the wide load stabiliser attachment, whilst the adjustable outer forks support and balance the load. Risk of product damage can also be reduced.

The Adjustable Four Fork Attachment is manufactured to order.

Key features:

• Outer forks laterally adjustable to allow greater flexibility when handling loads of different widths

• Four forks allow wide loads to be supported safely whilst helping to reduce product damage

• Heavy duty fork sleeves offering long service life properties

• Heavy duty cross beam ensures rigidity of the attachment

• Heel pin retention for safely securing the attachment to the forklift truck forks

• Finished in safety yellow gloss finish to ensure visibility when fitted to the lift truck

• 'CE' marked and supplied with Certificate of Conformity to comply with Health & Safety Regulations

Need another attachment? View our Materials Handling range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Coil Support Extension - Model 100/1525 - Fork Width 100mm - Extension Length 1525mm - Max Fork Section 100mm x 50mm


Coil Support Extension - Model 100/1830 - Fork Width 100mm - Extension Length 1830mm - Max Fork Section 100mm x 50mm


Coil Support Extension - Model 125/1525 - Fork Width 125mm - Extension Length 1525mm - Max Fork Section 125mm x 50mm


Coil Support Extension - Model 125/1830 - Fork Width 125mm - Extension Length 1830mm - Max Fork Section 125mm x 50mm


Coil Support Extension - Model 150/1525 - Fork Width 150mm - Extension Length 1525mm - Max Fork Section 150mm x 60mm


Coil Support Extension - Model 150/1830 - Fork Width 150mm - Extension Length 1830mm - Max Fork Section 150mm x 60mm


Coil Support Extension

This Coil Support Extension or roll handling attachment is designed to slip over the truck forks simultaneously to give a greater bearing area for the carrying of steel coils, rolls of wire, sheet polythene etc.  The domed nature of the design prevents fork damage to the internal core of the product being handled.

With safety retaining pins to ensure the Coil Support Extension is safely and securely located to your forklift forks, our coil supports provide a good solution for carrying out your roll handling duties.

Key features:

• Suitable for handling rolled products to reduce manual and increase productivity

• Domed top surface to minimise damage to product being handled, reducing handling costs

• Fork mounted to allow quick changeover between coil support and truck forks, reducing downtime and standing

• Tailor made to suit application to ensure coil support suits roll or coil being handled

• Heel retention pins to ensure the coil support is safely and securely fastened to the lift truck forks

• 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Available Heavy Duty Fork Extensions sizes:

Model 100/1525 | Fork Width 100mm | Extension Length 1050mm | Max Fork Section 100mm x 50mm

Model 100/1830 | Fork Width 100mm | Extension Length 1200mm | Max Fork Section 100mm x 50mm

Model 125/1525 | Fork Width 125mm | Extension Length 1050mm | Max Fork Section 125mm x 50mm

Model 125/1830 | Fork Width 125mm | Extension Length 1200mm | Max Fork Section 125mm x 50mm

Model 150/1525 | Fork Width 150mm | Extension Length 1050mm | Max Fork Section 150mm x 60mm

Model 150/1830 | Fork Width 150mm | Extension Length 1200mm | Max Fork Section 150mm x 60mm

Need a different type of forklift attachment? View our full range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Polyurethane Covered Fork Extensions - Model 100/1600 - Fork Width 100mm - Extension Length 1525mm - Max Fork Section 100mm x 50mm


Polyurethane Covered Fork Extensions - Model 100/1300 - Fork Width 100mm - Extension Length 1220mm - Max Fork Section 100mm x 50mm


Polyurethane Covered Fork Extensions - Model 125/1300 - Fork Width 125mm - Extension Length 1220mm - Max Fork Section 125mm x 50mm


Polyurethane Covered Fork Extensions - Model 125/1600 - Fork Width 125mm - Extension Length 1525mm - Max Fork Section 125mm x 50mm


Polyurethane Covered Fork Extensions - Model 125/1900 - Fork Width 125mm - Extension Length 1830mm - Max Fork Section 125mm x 50mm


Polyurethane Covered Fork Extensions - Model 150/1600 - Fork Width 150mm - Extension Length 1525mm - Max Fork Section 150mm x 60mm


Polyurethane Covered Fork Extensions - Model 150/1300 - Fork Width 150mm - Extension Length 1220mm - Max Fork Section 150mm x 60mm


Polyurethane Covered Fork Extensions - Model 150/1900 - Fork Width 150mm - Extension Length 1830mm - Max Fork Section 150mm x 60mm


Polyurethane Covered Fork Extensions

Offering all the benefits and characteristics of our high quality forklift extensions, our Polyurethane Covered Fork Extensions come with the added benefit of being spray coated with 3mm thick Polyurethane.  Unlike rubber coating which can peel away over  time, the Polyurethane coating is strongly bonded to the fork sleeve, making it very hard wearing and durable.

When the Polyurethane coating is applied to the fork sleeves, this can significantly help reduce product marking and damage, which can sometimes be the case when using conventional steel forks. To help provide anti-slip properties, our Polyurethane Covered Fork Extensions can also come supplied (on request) with sprinkled rubber crumb.

Manufactured to conform to ISO 13284 British Standards, our forklift protection sleeves offer the perfect solution when it comes to reducing product damage

Key features:

• 3mm thick Polyurethane coating to reduce steel on steel contact and help reduce product damage

• Manufactured from 8mm thick steel with additional 5mm thick internal strengthening plates for maximum durability and longevity

• Fully formed profile toe section with end cap for added strength

• Chiselled shaped toe profile provided easy glide into pallets, speeds up operations whilst helping to reduce product/pallet damage

• Fixed retaining bar (retaining pins are used when extension length greater than 2000mm) for safely securing to the truck forks

• 'CE' marked and supplied with Certificate of Conformity to comply with Health & Safety Regulations

Available Heavy Duty Fork Extensions sizes:

Model 100/1300 | Fork Width 100mm | Extension Length 1220mm | Max Fork Section 100mm x 50mm

Model 100/1600 | Fork Width 100mm | Extension Length 1525mm | Max Fork Section 100mm x 50mm

Model 125/1300 | Fork Width 125mm | Extension Length 1220mm | Max Fork Section 125mm x 50mm

Model 125/1600 | Fork Width 125mm | Extension Length 1525mm | Max Fork Section 125mm x 50mm

Model 125/1900 | Fork Width 125mm | Extension Length 1830mm | Max Fork Section 125mm x 50mm

Model 150/1300 | Fork Width 150mm | Extension Length 1220mm | Max Fork Section 150mm x 60mm

Model 150/1600 | Fork Width 150mm | Extension Length 1525mm | Max Fork Section 150mm x 60mm

Model 150/1900 | Fork Width 150mm | Extension Length 1830mm | Max Fork Section 150mm x 60mm

Need a different type of forklift attachment? View our full range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Radius Top Fork Extensions - Model 100/1200 - Fork Width 100mm - Extension Length 1200mm - Max Fork Section 100mm x 50mm


Radius Top Fork Extensions - Model 100/1500 - Fork Width 100mm - Extension Length 1500mm - Max Fork Section 100mm x 50mm


Radius Top Fork Extensions - Model 125/1200 - Fork Width 125mm - Extension Length 1200mm - Max Fork Section 125mm x 50mm


Radius Top Fork Extensions - Model 125/1500 - Fork Width 125mm - Extension Length 1500mm - Max Fork Section 125mm x 50mm


Radius Top Fork Extensions - Model 150/1200 - Fork Width 150mm - Extension Length 1200mm - Max Fork Section 150mm x 60mm


Radius Top Fork Extensions - Model 150/1500 - Fork Width 150mm - Extension Length 1500mm - Max Fork Section 150mm x 60mm


Radius Top Fork Extensions

Offering all the same characteristics as our heavy duty fork extensions, these Radius Top Fork Extensions slip over the existing forklift forks to increase the load bearing area. Rolled products such as small steel coils, coils of wire, plastic etc can be handled without the fork edges causing damage to the product.

The Radius Top Fork Extensions are manufactured from heavy duty 8mm thick steel with additional 5mm thick internal strengthening plates. We also incorporate a fully formed profile toe with end cap for added strength.

Fixed retaining bars (removable pin is used instead when sleeve length is greater than 2000mm) safely secures the fork sleeves to the truck forks.

Manufactured to conform to ISO 13284 British Standards, our radius top fork sleeves offer the perfect solution for handling rolled products where fork edges can cause damage.

Key features:

• 8mm pressed steel with additional 5mm thick internal strengthening plates for added strength

• Radiused top to increase load bearing area whilst preventing sharp fork edges from causing damage to the inner core of the rolled product being handled

• Profiled toe with profiled end cap for added strength

• Fixed retaining bar (retaining pins are used when extension length greater than 2000mm) for safely securing to the truck forks

• 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Available Heavy Duty Fork Extensions sizes:

Model 100/1200 | Fork Width 100mm | Extension Length 1200mm | Max Fork Section 100mm x 50mm

Model 100/1500 | Fork Width 100mm | Extension Length 1500mm | Max Fork Section 100mm x 50mm

Model 125/1200 | Fork Width 125mm | Extension Length 1200mm | Max Fork Section 125mm x 50mm

Model 125/1500 | Fork Width 125mm | Extension Length 1500mm | Max Fork Section 125mm x 50mm

Model 150/1200 | Fork Width 150mm | Extension Length 1200mm | Max Fork Section 150mm x 60mm

Model 150/1500 | Fork Width 150mm | Extension Length 1500mm | Max Fork Section 150mm x 60mm

Need a different type of forklift attachment? View our full range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Triangular Fork Extensions - Model 100/1525 - Fork Width 100mm - Extension Length 1525mm - Max Fork Section 100mm x 50mm


Triangular Fork Extensions - Model 100/1830 - Fork Width 100mm - Extension Length 1830mm - Max Fork Section 100mm x 50mm


Triangular Fork Extensions - Model 125/1525 - Fork Width 125mm - Extension Length 1525mm - Max Fork Section 125mm x 50mm


Triangular Fork Extensions - Model 125/1830 - Fork Width 125mm - Extension Length 1830mm - Max Fork Section 125mm x 50mm


Triangular Fork Extensions - Model 150/1525 - Fork Width 150mm - Extension Length 1525mm - Max Fork Section 150mm x 60mm


Triangular Fork Extensions - Model 150/1830 - Fork Width 150mm - Extension Length 1830mm - Max Fork Section 150mm x 60mm


Triangular Fork Extensions

Offering all the same characteristics as our heavy duty fork extensions, these Triangular Fork Extensions come with the added feature of an angled face plate to allow cylindrical loads such as paper reels, cable drums etc. to be handled with a forklift without the product rolling off the forks.

The Triangular Fork Extensions are manufactured from heavy duty 8mm thick steel with additional 5mm thick internal strengthening plates. We also incorporate a fully formed profile toe with end cap for added strength.

Fixed retaining bars (removable pin is used instead when sleeve length is greater than 2000mm) safely secures the fork sleeves to the truck forks.

Manufactured to conform to ISO 13284 British Standards, our triangular fork sleeves offer the perfect solution for handling rolled products on the forks.

Key features:

• 8mm pressed steel with additional 5mm thick internal strengthening plates for added strength

• Angled face plate to allow cylindrical loads to he handled without rolling off the forks

• Profiled toe with profiled end cap for added strength

• Fixed retaining bar (retaining pins are used when extension length greater than 2000mm) for safely securing to the truck forks

• 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

Available Heavy Duty Fork Extensions sizes:

Model 100/1525 | Fork Width 100mm | Extension Length 1525mm | Max Fork Section 100mm x 50mm

Model 100/1830 | Fork Width 100mm | Extension Length 1830mm | Max Fork Section 100mm x 50mm

Model 125/1525 | Fork Width 125mm | Extension Length 1525mm | Max Fork Section 125mm x 50mm

Model 125/1830 | Fork Width 125mm | Extension Length 1830mm | Max Fork Section 125mm x 50mm

Model 150/1525 | Fork Width 150mm | Extension Length 1525mm | Max Fork Section 150mm x 60mm

Model 150/1830 | Fork Width 150mm | Extension Length 1830mm | Max Fork Section 150mm x 60mm

Need a different type of forklift attachment? View our full range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Insulated Battery Changing Beam - Forks, 1000kg


Insulated Battery Changing Beam - Forks, 2000kg


Insulated Battery Changing Beam - Forks/Crane, 1000kg


Insulated Battery Changing Beam - Forks/Crane, 2000kg


Insulated Battery Changing Beam

Our Insulated Battery Changing Beam is designed for sliding and clamping onto the forks of any forklift truck to facilitate safe and simple removal and replacement of the fork truck insulated battery without damage. Due to the different battery size configurations on the market, we tailor make our battery changing beams to suit the battery being handled.

This Insulated Battery Changing Beam comes with all four slings manufactured from non conductive material for added safety.

Key features:

• Allow simple and safe removal of forklift truck batteries without causing damage

• All four slings manufactured from non conductive material for added safety

• Few moving parts, offering low service and maintenance costs

• 'T' screw clamps to ensure battery changing beam is safely secured to the lift truck forks

• Painted in safety yellow gloss finish for increased visibility on the lift truck

• 'CE' marked and supplied with Certificate of Conformity for Health & Safety Regulations

Need another attachment? View our Lifting Equipment range here.

If you have any questions relating to this product or any in our range then please call 0330 043 3747 or email sales@tippingskips.co.uk and one of our team will be on hand to discuss your requirements, lead times, delivery options or simply advise on the most appropriate equipment for your needs.


Low Profile Battery Changing Beam - Forks, 1000kg


Low Profile Battery Changing Beam - Forks, 2000kg


Low Profile Battery Changing Beam - Forks/Crane, 1000kg


Low Profile Battery Changing Beam - Forks/Crane, 2000kg